Frequently Asked Questions

Please feel free to contact us with any questions you might have. Call us at 1300TOOLMAKER or (02) 9623 2291 or complete our online Information Request Form. You may want to check this list of frequently asked questions to save time.

Request an Information Pack
We can form metal in thicknesses ranging from 0.1mm through to 10mm depending on material type.

Over the past 40 years we have worked with just about every kind of material. Some of the more common materials we work with include:

  • All carbon steels
  • Stainless steel
  • Aluminum
  • Copper
  • Beryllium Copper
  • Phosphor Bronze
  • Spring Steel

All in a wide range of finishes and tempers.

Absolutely! We gladly accept customer supplied material. Don Green Engineering can receive sheet stock up to 2400mm x 1200mm, coils up to 1 ton and sheared strips.
Don Green Engineering blank size capacity is 1200mm x 900mm and up to 200 tons. However, we often perform secondary stamping operations on larger customer furnished parts.
We can work to most reasonable tolerances; Don Green Engineering works to +/- 0.1mm. If tighter tolerances are required, we are able to hold +/- 0.025mm when needed.
Don Green Engineering maintains all tools in house.
Depending on the complexity of the changes.
Yes. We are here to meet your needs.
Of course. We only ask that your parts be shipped within 30 days of completion.
Yes, go ahead and send us your DXF, DWG or PDF files by e-mail, disk or CD ROM.